Digit Wood Primer (White/pink)

  Home   |   Products   |  Digit Wood Primer (White/pink)
...

Digit Wood Primer (White/pink)

Digit Wood Primer is a specially formulated undercoat for wooden substrates, which assures strong adhesion and enhances performance of the paint film. Dries to enhance performance Anti-Fungal and Anti-Algal Properties Primes and seals a variety of woods.

 

Book Consultation

Coverage

10)– 120 sq.ft/ltr/coat )
*Actual coverage may differ from the quoted figures due to factors such as method of application, environmental conditions and surface of the wall.

Surface Preparation

  • Surface to be primed must be clean, dry and free from contaminants.
  • Fill and repair all cracks and joints.
  • Remove any flaking or blistering paint by chemical, mechanical means.
  • For adhesion on glossy surfaces, scuff sand surface thoroughly before priming

Application Procedure

  • Application by brush, roller or spray.
  • Stir well before use.
  • Apply with a brush and work well into the wood grain.
  • Apply a full coat, allow to dry overnight.
  • Sand back using #150-180 grit paper.
  • If necessary, re-coat areas that show substrate after sanding.
  • Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

Safety Features

  • Store the product at ambient conditions in well ventilated locations and away from source of ignition and fire.
  • Keep out of reach of children and away from eatables.
  • May be harmful if swallowed. In case of ingestion seek immediate medical attention.
  • Use protective equipment like rubber/ gloves, safety goggles/glasses, face mask while handling the paint.
  • Wear eye protection and face mask during application. In case of contact with eyes, rinse immediately with plenty
    of fresh water and seek medical advice.
  • In case of skin contact immediately wash skin with soap and plenty of fresh water.
  • Get medical attention if irritation develops or persists.
  • It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
  • Do not pour leftover paint down the drain or in water courses.
  • Dispose in land filling. Do not dispose in any drain. No added Mercury, Arsenic & Chromium.
  • Flammable.