Digit-All Hi-Gloss Enamel

  Home   |   Products   |  Digit-All Hi-Gloss Enamel
...

Digit-All Hi-Gloss Enamel

An easy-to-use hi-gloss enamel developed by the Digital Paints P. Ltd, to meet the needs of desired quality for Customers. As a hard-wearing, glossy enamel with fungal and algal protection, Digit-All Hi-Gloss Enamel can be applied to both interior and exterior metal and wood. It forms a tough film that is highly resistant to household stains.

 

 

 

 

 

 

 

 

Book Consultation

 Coverage

50-55 sqft/liter/per coat

(** Actual coverage is dependent on the substrate Condition, surface porosity, method of application)

Pack Size

  • 20 Ltrs
  • 4 Ltrs
  • 1 Ltrs
  • 0.5 Ltrs

Features

Premium Quality

Hard Wearing

Algae and Mildew Resistant Finish

Excellent Coverage

High Sheen with Smooth Finish

Superior non-yellowing performance

Anti fungle and anti-algal properties

Safety Features

  • Store the container with the lid tightly closed in an upright position, in a cool, dry place.
  • Keep out of reach of children and away from eatables.
  • May be harmful if swallowed. In case of ingestion seek immediate medical attention.
  • Wear eye protection and face mask during application. In case of contact with eyes, rinse
  • immediately with plenty of fresh water and seek medical advice.
  • In case of skin contact immediately wash skin with soap and plenty of fresh water.
  • Get medical attention if irritation develops or persists.
  • It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
  • Do not pour leftover paint down the drain or in water courses.
  • Fire hazard class – Nonflammable.
  • No added Lead, Mercury, Arsenic & Chromium.

 

Surface Preparation

  • Surface must dry, clean and free of contaminants.
  • Prime wood with Digit Wood Primer.
  • Prime metal with Digit metal primer.
  • Treat resinous knots in wood.
  • Sand previously painted surfaces.
  • Wipe clean with damp, lint-free cloth.

Application Procedure

  • Stir thoroughly before use.
  • Topcoat with brush, roller or spray.
  • For spray application thin by no more than 10% with Reducer.
  • Apply 1 coat of Digit wood/metal primer if desired
  • Apply 1 – 2 coats of Digit-All Hi-Gloss Enamel.
  • Recoating time 8 – 10 hours depending on drying rate.